How to pass Security+ SY0-701

In this guideThe exam format, the five domains, two study plans, the traps, and exam day.

The short answer

How to pass, in two paragraphs

To pass Security+ SY0-701, study all 28 exam objectives in proportion to their domain weights, answer scenario questions every day instead of rereading notes, and spend your last weeks on the look-alike pairs you still mix up.

The exam rewards telling similar terms apart inside a short story, so a plan built on practice questions, spaced review of your misses, and one or two full-length timed runs works better than a plan built on reading alone.

This guide covers what the exam is, what each of the five domains tests, a 4-week and an 8-week study plan, how SY0-701 questions are built and the traps they set, and what to do in the last week and on exam day. Every objective has its own page with a short answer, the pairs people mix up, key terms, and a sample question. The links below go straight to them, and the SY0-701 objectives hub lists all 28 in one place.

Written by Knotch · reviewed Nov 16, 2026

Run the loop

Learn, practice, review, fix. Knotch runs that loop across all 28 objectives.

  • 129step-by-step lessons with predict-and-reveal and look-alike duels
  • 1,362exam-style questions with a rationale for every wrong answer
  • 1review queue that brings back what you missed
Start practicing freeFree to start. No card needed.
The format

What the exam is

SY0-701 is the Security+ exam version that launched in November 2023. According to the exam objectives document, it has a maximum of 90 questions, a time limit of 90 minutes, and two kinds of questions: multiple choice and performance-based.

  • Multiple-choice questions describe a short situation and ask for the best answer from a list.
  • Performance-based questions (PBQs) ask you to do a task instead of picking a letter. CompTIA describes the Security+ ones as simulations: simplified imitations of tools such as a firewall, a network diagram, a terminal, or an operating system. Where there is more than one correct way to reach the result, any correct solution earns credit.
  • Scoring details are mostly private. CompTIA says some PBQs may give partial credit but does not say which, and it does not publish point values for individual questions.

The exam is organized into five domains and 28 objectives. Treat the objectives document as your syllabus: plan your study around its objectives, and check each one off only when you can answer questions on it, not when you have read about it.

SY0-701 also has an end date. CompTIA lists June 11, 2027 as the retirement date for the English version (August 13, 2027 for Japanese, Portuguese, Spanish, and Thai). Its successor, SY0-801, was announced for on or around November 17, 2026, and both versions can be taken until SY0-701 retires. If you are studying for SY0-701, book an exam date before it retires.

Sources: the Security+ V7 exam page, the Security+ V8 exam page, and CompTIA's performance-based question FAQ, checked on the review date above.

Where the points are

The five domains and what they test

The weights are the share of the exam each domain carries. Use them to divide your time, not to skip a domain: even the smallest one is about one question in eight.

Domain 1: General Security Concepts (12%)

This is the vocabulary the rest of the exam assumes. Expect to classify a control on two separate axes, separate authentication from authorization, explain why a change process matters to security, and pick the right cryptographic tool for a job.

Domain 2: Threats, Vulnerabilities, and Mitigations (22%)

This domain asks who attacks and why, how they get in, which weakness they use, what the evidence looks like, and which mitigation fits. Many questions hand you an indicator, such as a log pattern or a user report, and ask you to name the attack. Practice going from symptom to name, not only from name to definition.

Domain 3: Security Architecture (18%)

This domain is about where things go and why. It covers cloud and on-premises models, containers and virtual machines, placing devices such as firewalls and intrusion prevention systems, protecting data in each of its states, and keeping services running through failures. Expect design questions where two options would both work, but only one fits the constraint in the stem.

Domain 4: Security Operations (28%)

The largest domain, with nine objectives, covers day-to-day security work: hardening systems, handling assets, managing vulnerabilities, monitoring, enterprise controls such as email authentication and filtering, identity and access, automation, incident response, and the data sources used in an investigation. Many questions ask for the next step or the right tool, so learn the order of each process as well as the names in it.

Domain 5: Security Program Management and Oversight (20%)

This domain covers governance: policies, standards and procedures, risk terms such as RTO and RPO, vendor agreements, compliance, audits, and security awareness. It is easy to underestimate because it reads like common sense, but the answer often turns on one precise word, such as appetite versus tolerance or audit versus assessment.

Your plan

A 4-week plan and an 8-week plan

Pick the 4-week plan if you already work in IT or security and most of the terms are familiar. Pick the 8-week plan if many of them are new, or if you can study only an hour or so a day. If you are new to IT as well as to security, expect to need longer: CompTIA recommends Network+ and two years of hands-on experience before this exam, so stretch the 8-week plan to two weeks per domain. Both plans run the same loop every week:

  1. Learn one block of objectives. Start with the short answer and the look-alike pairs on each objective page, then go deeper with your course, book, or lessons.
  2. Practice scenario questions on that block the same day. Read the explanation for every wrong option, not only the right one, because the wrong options are where the exam hides its traps.
  3. Review your misses on a spaced schedule: the next day, a few days later, then a week or more later. Retrieving an answer after a gap helps it stick.
  4. Loop on weak spots. At the end of each week, sort your misses into three piles: did not know it, mixed it up with a look-alike, or misread the question. Spend the next session on the biggest pile.

The 4-week plan

WeekLearnPractice and review
1Domains 1 and 2 (objectives 1.1 to 2.5)Daily questions on the week's objectives; start your review queue
2Domain 3 and objectives 4.1 to 4.5Daily questions; review queue every day; one mixed set from week 1
3Objectives 4.6 to 4.9 and Domain 5Daily questions; one half-length timed run at the end of the week
4Nothing newWeak-spot loops, one full-length timed run, then the last-week routine below

The 8-week plan

WeekLearnPractice and review
1Domain 1 (1.1 to 1.4)Daily questions on the week's objectives; start your review queue
2Domain 2 (2.1 to 2.5)Daily questions; review queue every day
3Domain 3 (3.1 to 3.4)Daily questions; one mixed set from weeks 1 and 2
4Objectives 4.1 to 4.5Daily questions; one short timed run to check your pace
5Objectives 4.6 to 4.9Daily questions; one mixed set from all earlier weeks
6Domain 5 (5.1 to 5.6)Daily questions; one half-length timed run
7Nothing newWeak-spot loops across all five domains; one full-length timed run
8Nothing newThe last-week routine below

Judge progress by your accuracy on fresh questions in every domain, not by hours studied or pages read. A domain where you are strong on definitions but weak on scenarios is not done yet.

Using Knotch for the plan

Knotch is a study app for SY0-701, and it is built around this loop. Each objective has step-by-step lessons and exam-style questions with an explanation for every wrong answer. A short placement check, two questions per domain, suggests where to start. Questions you miss go into a review queue that brings them back on a spaced schedule, timed by whether you were right and how sure you said you were. In practice and review sessions, a miss shows a short "What tripped you?" card where you can name the trap, and if it was a mix-up or a gap, a question on the same idea can come back later in the session. Timed exams come in 20, 45, and 90-question lengths for pacing practice.

Progress is shown as plain numbers: accuracy in each domain, an overall accuracy weighted by the exam's domain weights, and the share of review cards you can recall after 21 days or more. Knotch does not show a single "ready" percentage, and it tells you when there is not yet enough data to judge. Domain 1 and the placement check are free. The other four domains and timed exams come with a one-time pass.

Read the trap

How SY0-701 questions are built

Knowing the definitions is necessary, but many misses come from how the questions are put together. Three patterns account for a lot of them.

Scenario stems. Most questions open with a short situation, such as a company, a log entry, or a user report, and then ask for the BEST, MOST likely, or FIRST answer. Read the last sentence first so you know what you are looking for, then read the scenario for the one detail that decides it: a constraint like "without installing software", a timing word like "after", or a scope like "every user".

Look-alike pairs. The wrong options are usually real terms from the same objective, chosen because they sit close to the right answer. Every objective page lists the pairs people mix up, with the deciding difference for each. Learning that difference turns many 50/50 guesses into sure answers.

Performance-based questions. PBQs ask you to configure, sort, or place things in a simulated tool. Candidates commonly report tasks such as ordering firewall rules, reading log lines to identify an attack, placing devices on a network diagram, matching attacks to mitigations, and putting incident response steps in order. CompTIA says simulations can be skipped and returned to, so you can flag a long one, answer the multiple-choice questions, and come back with the time you have left.

Three common traps

  1. Preventive or detective? A question describes cameras recording a lobby and asks which control type they are. "Preventive" is tempting because cameras feel protective, but preventive controls stop the action, and detective controls only notice it, so someone still has to respond. A recording camera is detective, and a visible one also deters. See 1.1 Security controls.
  2. Brute force or password spraying? A log shows the same few common passwords tried against hundreds of accounts, only one or two attempts per account. "Brute force" is the familiar name, but brute force tries many passwords against one account. One password across many accounts is spraying, and it is built to stay under lockout limits. See 2.4 Indicators of malicious activity.
  3. Replication or backup? Ransomware encrypts a file server that has a live replica at a second site, and the question asks what restores the data. Replication mirrors data, including the damage, so the replica is encrypted too. A backup preserves history, so an earlier clean version can be restored. See 3.4 Resilience and recovery.
Final stretch

The last week and exam day

In the last week, stop adding new material and work on what you already know but still get wrong.

  • Take one full-length timed run early in the week, then review every miss. Do not take one the night before the exam.
  • Work your miss list and review queue every day, with the most attention on your weakest domain.
  • Reread the look-alike pairs for your three weakest objectives, and say the deciding difference out loud for each one.
  • Confirm the logistics with your exam provider: the time, the ID you need, and the test center or online setup.
  • Sleep. A tired reader misses the one word in the stem that decides the answer.

On exam day, keep these rules:

  • Pace yourself. Up to 90 questions in 90 minutes is about a minute each on average, so time spent on a long PBQ has to come from somewhere else. If one is eating your clock, flag it and move on.
  • Read the last line first, then the scenario, then the options.
  • Eliminate by axis and timing. Cross out options from the wrong category, the wrong phase of a process, or the wrong side of a look-alike pair before you choose.
  • Answer every question. An unanswered question cannot earn credit, so make your best pick before time runs out.
Quick answers

Frequently asked questions

How long should I study for Security+ SY0-701?

About 4 weeks if you already work in IT or security, and 8 weeks or more if most of the terms are new to you. Measure readiness by your accuracy on fresh scenario questions across all five domains, not by hours.

How many questions are on the SY0-701 exam?

Up to 90 questions in 90 minutes, a mix of multiple-choice and performance-based questions, according to the exam objectives document.

Which SY0-701 domain is the biggest?

Domain 4, Security Operations, at 28% of the exam with nine objectives. Domain 2, Threats, Vulnerabilities, and Mitigations, is next at 22%.

When does SY0-701 retire?

CompTIA lists June 11, 2027 as the retirement date for the English exam. Its successor, SY0-801, was announced for on or around November 17, 2026.

Can I skip performance-based questions on Security+?

CompTIA says simulation PBQs can be skipped and returned to later, and that some PBQs may give partial credit. Many candidates flag long ones, finish the multiple-choice questions, and come back with the time left.

You have the plan. Now run the loop.

Start practicing free